Wheelchair & Scooter Lifts

Bruno Outsider Hitch Lift

This easy-to-use product lifts and stores your unoccupied scooter or power wheelchair outside your vehicle at the touch of a button. Simply roll your mobility device on the platform from either side, hit a button, and let the Meridian do the lifting for you. Scooters and powerchairs are automatically secured when lift is raised. Retractable belts are also available for securement.

Bruno Curbsider Scooter Lift & Wheelchair Lifter

Bruno invented the Curb-Sider style lift and this is the world’s most popular vehicle lift (over 80,000 sold). The Curb-Sider lifts and stows your scooter or powerchair inside your vehicle with the touch of a button. Simply connect the docking device, push a button on the hand-held pendant and let your Curb-Sider do the heavy lifting for you!

Bruno Joey Platform Scooter and Wheelchair Loader

This simple-to-use product lifts and stores your unoccupied scooter or powerchair inside your minivan or full size van at the touch of a button. Simply roll your mobility device on the platform from either side, hit a button, and let the Joey lift and store your mobility device for you. Securement belts are included for safety during transport. An optional barrier system is available for added safety and convenience.

Bruno Chariot Vehicle Lift For Hitch

This groundbreaking product lifts and stores your unoccupied scooter or powerchair (weighing up to 350 lb/160 kg) outside your small, mid-sized, or large car at the touch of a button. Simply roll your mobility device on the platform from either side, hit a button, and let the Chariot do the lifting for you. Self-tensioning retractable belts are included for securement (one hand operation).

Bruno Out-Rider Pickup Truck Wheelchair Loader

The Out-Rider has been the industry standard for over 15 years. It quickly lifts your manual wheelchair or travel scooter (HD version available for your heavier powerchair or scooter) from the front door of your pickup truck and stores it in the bed for transport, all with the touch of a button. Simply connect the docking device, push a button and let your Out-Rider do the lifting for you!

Bruno AWL-150 Lifts & Stores Light Wheelchairs & Scooters

Bruno’s Lifter conveniently lifts and stores your Personal Mobility Device (manual folding wheelchair, travel scooter, travel powerchair) inside your vehicle at the touch of a button. Connect the docking device, push a button and let your Lifter do the heavy lifting for you!

Bruno Space Saver Loads & Stores Your Wheelchair or Scooter

The Space-Saver lift, meant for smaller vehicle openings, lifts and stores your smaller scooter or travel powerchair into vehicles with the touch of a button. Assemble the lift, connect the docking device, push a button, and let your Space-Saver do the lifting for you!

Outside Lifts

An Outside Auto Lift is attached to the vehicle by means of a hitch and consists of an actuator and platform which secures and carries the mobility device on the back of the vehicle.

The operator of an Outside Lift should have the following capabilities:

• Walk from the front to the rear of the vehicle and back
• Stand for two to three minutes while the lift operates
• Drive or push the mobility device on/off the platform
• Insert the key and rotate it 90 degrees to turn on and activate the lift
• Apply pressure to hold the up/down toggle switch while the lift operates
• For Retractors, connect hook to location on mobility device. Pull strap end or turn knob to increase tension (single and dual-hand retractors available).

Hybrid Auto Lifts

Hybrid Lifts are mounted in the vehicle’s cargo area but are designed to move out and down so that the mobility device is loaded onto the platform on the ground. It is then lifted automatically into the vehicle for transport.

The operator of a Hybrid Lift should have the following capabilities:

• Walk from the front to the rear of the vehicle and back
• Stand for up to three minutes while the lift operates
• Drive or push the mobility device on/off the platform
• Fold down the seat back of the mobility device and/or scooter tiller until it is in its most compact position
• Apply pressure to hold down a button on the handheld control while the lift operates
• For Tie-Down Straps, connect hook to location on mobility device. Pull strap end to increase tension. Self retracting straps upgrade available

Inside Auto Lifts/Hoists

Inside Lifts are mounted in the vehicle’s cargo area with a hoist mechanism that swings outside the vehicle to load and lift the mobility device into the vehicle.

The operator of a Inside Lift should have the following capabilities:

• Walk from the front to the rear of the vehicle and back
• Stand for up to three minutes while the lift operates
• Attach docking device mobility device
  • May require bending over or kneeling
  • May require adequate hand dexterity
  • May require balance and strength to attach the docking device
• Fold down the seat back of the mobility device and/or scooter tiller until it is in its most compact position
• Apply pressure to hold down a button on the handheld control while the lift operates
• Guide the mobility device to avoid interference while raising, rotating, and entering the vehicle through complete lift cycle

NEW! AL100HD

Universal Scooter Lift
Sets the standard for all other Scooter Lifts. Combine with virtually any scooter/auto application.

• Automatic hold down foot
• 27.5” x 39” aluminum deck, adjustable cradle extends up to 46”
• Manual crank backup and license plate mount included
• Swing-Away option available

Capacity: 400 lbs. (181 kg)
Installed Weight: 84 lbs. (38 kg)

AL300HD

Heavy-Duty Fusion Lift

The AL300HD has the power to heft 400 lbs. and easily accommodates most power chairs and scooters. It’s adjustable wheel cradle extends up to 46″.

Capacity: 400 lbs. (181 kg)
Installed Weight: 82 lbs. (37 kg)

AL301XLHD

Heavy-Duty Fusion Lift

Extra long and heavy duty 400 lbs. capacity. The AL301XLHD offers the largest platform in the industry plus the strength to handle extra large power chairs and scooters. The wheel cradles adjust easily, extending up to 53″ long.

Capacity: 400 lbs. (181 kg)
Installed Weight: 102 lbs. (46 kg)

AL500HD

Heavy-Duty Universal Power Chair Lift

The AL500HD is Harmar’s heavy-duty version of our popular Universal Power Chair Lift, with the increased weight capacity of 400 lbs. It secures the large power chair with ultra-safe and versatile Q’Straint retractors.Capacity: 400 lbs. (181 kg)

Installed Weight: 77 lbs. (35 kg)

AL001 Universal Manual Carrier

Economical, manual solution for power chairs and scooters

• No chair/scooter modifications required
• Folds when not in use
• Class III hitch adapter standard; Class II hitch adapter upgrade available
• 28” x 48” Platform with a 60” Folding Ramp

Capacity: 500 lbs. (227 kg)
Installed Weight: 84 lbs. (38.1 kg)

AL003 Tilt-n-Tote

Light weight non-powered solution for manual folding wheelchairs

• Carries manual folding wheelchairs
• Tilting joint for roll-on ease
• Unique adjustable hold-down arm
• Folds down to access tail and lift gate
• No chair modifications required
• Folds when not in use
• Ball mount standard, upgrades available
• Hitch post not needed with ball mount

Capacity: 100 lbs. (45 kg)
Installed Weight: 25 lbs. (11 kg)

AL010/050 Micro Outside Lift

Carries 3 and 4-wheel travel scooters, and power chairs

• Powered lift with manual fold
• 4 tie-downs and wheel cradle
• Class II hitch adapter standard; Class I, II, III hitch adapter upgrades available
• 23.5” x 33” platform, adjustable cradle up to 40”
• Manual crank backup and license plate mount
• Swing-Away option available

Capacity: 135 lbs. (61 kg)
Installed Weight: 71 lbs./67 lbs. (32 kg/30 kg)

Features:

• Speed models are 2 times faster than HD (Heavy-duty) models and ideal for manual wheelchairs
• Heavy Duty models offer the greatest weight capacity and are ideal for Power Chairs and Scooters.
• Available for driver or passenger-side mounting. (Specify at time of order.)
• 3-Year Transferable Warranty